Rouge Rose

Just the Print means there is no special finishing included. The print will be carefully packaged and sent to you.

Just the Print means there is no special finishing. The print will be carefully packaged and sent to you. No gallery wrap, no framing.

Just the Print means there is no special finishing. The print will be carefully packaged and sent to you.

.75-inch Standard Wrap means that your canvas will be stretched with a depth of .75-inch. This size is suitable for framing. Any wider wrap will not be suitable for framing.

1.25-inch Standard Wrap means that your canvas will be stretched with a depth of 1.25-inch.

1.5-inch Gallery Wrap is ready to hang on your wall with no additional framing. This is the most common gallery wrap size.

1.75-inch Standard Wrap means that your canvas will be stretched with a depth of 1.75-inch.

2-inch Standard Wrap means that your canvas will be stretched with a depth of 2-inch.

2.5-inch Standard Wrap means that your canvas will be stretched with a depth of 2.5-inch.

Wrapped means that your canvas will be professionally wrapped over stretcher bars, and is ready to hang.

A Matted Print is where the print is inserted into a beautiful matte board.

Ready to Hang means the print will arrive ready to hang on your wall. Depending on the medium chosen and the size of your print, we may use different methods but it will always arrive ready to hang.

Once you select Frame, a FRAME tab will appear allowing you to select one of our gorgeous frames.

Our Float Mount Hangers and Metal Brackets are attached to the back of the print, and float the print 1/2-inch off the wall when hung. Styles and selection vary based on the size of the print ordered.

Styrene is a super smooth plastic mounting substrate that resists warping, making it an excellent choice for adding durability to prints of all sizes.

Bamboo 3/4" Standout Mount

Bamboo Mounts are made from organically grown, renewable, and FSC certified bamboo that not only looks good, but is also friendly to our environment. Ready to hang with a keyhole hanger in the back.

Brushed Stainless 3/4" Standout Mount

Print is mounted on a thick lightweight 3/4" backing, which lends a clean, contemporary look to your wall displays. Ready to hang with a keyhole hanger in the back.

Maple 3/4" Standout Mount

Print is mounted on a thick lightweight 3/4" backing, which lends a clean, contemporary look to your wall displays. Ready to hang with a keyhole hanger in the back.

Black 3/4" Standout Mount

Print is mounted on a thick lightweight 3/4" backing, which lends a clean, contemporary look to your wall displays. Ready to hang with a keyhole hanger in the back.

Styrene is a super smooth plastic mounting substrate that resists warping, making it an excellent choice for adding durability to prints of all sizes.

Just the MetalPrint. No hangers or holes.

Framing

Enhance the beauty of your MetalPrint or Gallery Canvas Wrap with a handcrafted Frame!

Paper Back without Cleat

White Paper is applied to the back of the finished Acrylic Print. No Dibond, cleat, posts or hangers are applied.

Paper backing w/ Large Posts

Mount your prints to a wall with Large Stainless Posts. Posts are 1" in diameter and come in a set of 4 pieces, one for each corner.

Just the Print

All Photo Prints are printed without a border.

Canvas Prints are printed with a 2" natural canvas Border

Framed Prints

With a large variety of high quality wood or metal frames, our Framed Prints are delivered display-ready with hanging hardware attached.

Allows the Wood Print to hang flat against the wall.

Fine Art Canvas Wraps are printed directly onto museum quality canvas material using high-quality archival inks. Your choice of Lustre (default) or Glossy Laminate is applied to each piece to protect the surface of the print.

Paper back w/ Small Posts

Mount your prints to a wall with Small Stainless Posts. Posts are 5/8" in diameter and come in a set of 4 pieces, one for each corner.

Floats the MetalPrint 3/4" off the wall when hung. Includes a French Cleat Picture Hanger, Wall Anchors, and Screws.

Canvas Board

Canvas Board Prints are made with a print on Professional Photo Paper bonded onto museum quality canvas, or a Fine Art Print printed directly onto canvas material. The print is then mounted on Gator Foamboard, which is very rigid foamboard and lightweight backing. It is durable and will not warp.

Dibond Backing w/ French Cleat Mounting Hangers

An easy, stable way to mount your print to the wall and keep it level.

Dibond Back without Cleat

Just the Acrylic Print with Dibond Back. No hangers or holes.

Dibond backing w/ Small Posts

Mount your prints to a wall with Small Stainless Posts. Posts are 5/8" in diameter and come in a set of 4 pieces, one for each corner.

Dibond backing w/ Large Posts

Mount your prints to a wall with Large Stainless Posts. Posts are 1" in diameter and come in a set of 4 pieces, one for each corner.

White Paper Backing w/ French Cleat Mounting Hangers

An easy, stable way to mount your print to the wall and keep it level.

A very rigid, durable, and lightweigt backing that will not warp. Available in a matte black finish.

A very rigid, durable, and lightweight backing that will not warp. The print is then mounted on a Gatorfoam block so it floats 1/2" off the wall. Available in a matte black finish.

Fine Art Canvas Wraps are printed directly onto museum quality canvas material using high-quality archival inks. Your choice of Lustre (default) or Glossy Laminate is applied to each piece to protect the surface of the print.

White 3/4" Standout Mount

Print is mounted on a thick lightweight 3/4" backing, which lends a clean, contemporary look to your wall displays. Ready to hang with a keyhole hanger in the back.

Floats the MetalPrint 3/4" off the wall when hung. Includes a Wire Hanger.

Mount the Cleat to the wall to easily and securely hang the print from the Float Hanger.

Our Canvas Gallery Wraps come by default with a luster laminate. If you would like your piece to be printed with a glossy laminate, select this option at no additional charge.

Our Acrylic Facemounts come by default on LexJet Lustre. If you would like your piece to be printed with LexJet Metallic, select this option.

Wood Prints are printed full bleed by default. If you would like your piece to be printed with a 1/2" natural wood border, select this option at no additional charge.

1/8" Rounded Corners

A Subtle rounded corner, recommended for display in areas where people may be close to or seated underneath the MetalPrints.

Our Exhibit Mount MetalPrints come by default with a natural aluminum edge on the metal. If you would like your piece to be printed with a black edge finish, select this option at no additional charge.

This image can be framed, but not in the chosen size.

Image Overflow is when the image wraps around the sides of the canvas. This effect causes you to lose a portion of the image on the front side of the canvas (approximately 1-2 inches, depending on the width of the stretcher bar), because that portion needs to be wrapped around the sides.

Mirrored Image is the most popular effect in canvas wrapping (particularly with photographs), where the last 1-2 inches (depending on the depth of the stretcher bars used) of the image are "mirrored" in order to create a smooth appearance on all the sides of the canvas wrap. With this Mirrored Image effect, no portion of the image is lost on the front side of the canvas.

Border Color is when a solid color is applied to the sides of the canvas wrap. When you choose the border color option, no portion of the image will be lost on the front side of the canvas.